Nothing fancy here … just a very minimalist mount for a Raspberry Pi (I have a few 3s and 2s). I used .16 mm resolution on my Sidewinder X1 with a 1.75 mm extruder. If you get stringing between the mount points you can try slowing down your print speed. The mount holes should fit very snug, the intent is to mount this on a wall.
Here is what it looks like in virtual life …
[vrm360 canvas_name=Canary_Stand_Vertical model_url=https://www.thegygers.com/wp-content/uploads/2020/04/Minimalist-Raspberry-Pi-Mount.stl aspect_ratio=1.5 initial_offset=1.5 lightintensity=0.5 mesh_color=#ADD8E6 autostart=false rx=-90,ry=0,rz=0]
And in real life …
